Revision as of 21:13, 3 January 2024

Here are some notes about some of the software I use in my lab.

USB devices

These are things I have setup on 'electra'.

Function	Equipment	Software	Version	Port	Note
Electronic Load	EBD-A20H	EB Tester Software	v1.8.5	COM4	Look for Ports (COM & LPT) in Device Manager, one of the CH340 options
Bench Multimeter	OWON XDM1041	DMMEasyControl	v1.8.2	COM3	Look for Ports (COM & LPT) in Device Manager, one of the CH340 options

These are things I have setup on 'wonder'.

Function	Equipment	Software	Version	Port	Note
Signal Generator	UNI-T UTG962E	DeviceManager	v1.2.3.0	USB	This works on 'wonder' but not on 'electra', dunno why
Bench Power Supply	RIDEN RD6006	RidenPowerSupply	v1.0.0.14	COM4	RD6006-1
Bench Power Supply	RIDEN RD6006	RidenPowerSupply	v1.0.0.14	COM3	RD6006-2
Logic Analyzer	Kingst LA1010	Kingst VIS	v3.6.2	USB	should auto-detect

These are things I can access via Bluetooth with my iPhone:

Function	Equipment	iPhone App	Note
Bench Multimeter	ANENG AN-999S	BluetoothDMM	in the 'electronics' folder on 'vili'

These are things I can access on the LAN:

Function	Equipment	Link	Note
Mixed Signal Oscilloscope	Rigol MSO5074	http://rigol.jj5.net/	RIGOL Web Control

These are some notes about where some things are installed.

Software	'wonder'	'verve'	'electra'
Arduino IDE		v2.2.1	v2.2.1
EditPlus	v5.7	v5.7	v5.7
Visual Studio Code	v1.85.1	v1.85.1	v1.85.1
WinZip	v28.0		v28.0
XAMPP			v3.3.0

@@ Line 62: / Line 62: @@
 | [[Kingst LA1010]]
 | Kingst VIS
+| v3.6.2
 | USB
 | should auto-detect