New pages
Jump to navigation
Jump to search
- 14:07, 22 April 2024 Microcontrollers (hist | edit) [8,589 bytes] Sixsigma (talk | contribs) (Created page with "{| ! Name ! Manufacturer ! Processor ! Wikipedia |- | STM32 | [https://www.st.com/en/microcontrollers-microprocessors/stm32-32-bit-arm-cortex-mcus.html ST Micro] | 32 bit ARM Cortex-M0 | [https://en.wikipedia.org/wiki/STM32 STM32] |- | SAMD21 | [https://www.microchip.com/en-us/product/ATSAMD21G18 Atmel] | 32 bit ARM Cortex-M0 | [https://en.wikipedia.org/wiki/Atmel_ARM-based_processors Atmel ARM-based processors] |}")
- 12:21, 29 March 2024 Insight (hist | edit) [6,743 bytes] Sixsigma (talk | contribs) (Created page with "My computer 'insight' is one of my computers in my lab. This Dell OptiPlex 7040 has been setup to serve as my electronics workstation. It runs Debian 12. I wanted a dedicated computer which had minimal USB devices connected so it's easier for me to find devices which are plugged in. Also I wanted a Linux workstation (Debian) instead of a Windows computer for this purpose. I intend to run MPLAB X and Arduino IDE on this computer among other things. There is...")
- 12:23, 18 March 2024 Maxitronix/20in1/1 (hist | edit) [864 bytes] Sixsigma (talk | contribs) (Created page with "This is project 1/20 for my Maxitronix Sensor Robot 20 code named 20in1. == Darlington Transistor == * https://en.wikipedia.org/wiki/Darlington_transistor == Multivibrator == * https://en.wikipedia.org/wiki/Multivibrator")
- 03:06, 13 March 2024 Maxitronix/10in1/7 (hist | edit) [1,352 bytes] Sixsigma (talk | contribs) (Created page with "This is project 7/10 for my Maxitronix 10in1. I asked about how to probe this circuit over here: https://www.eevblog.com/forum/beginners/how-to-measure-am-broadcast-circuit-with-oscilloscope/ I learned a few things: # All four probes on my scope have their ground leads connected to each other (there is only one ground) # To avoid potential problems for beginners it is best to only connect one ground lead (the others can be left unattached) # I should use my probes...")
- 03:01, 13 March 2024 Maxitronix (hist | edit) [315 bytes] Sixsigma (talk | contribs) (Created page with "When I want to make notes about any of my Maxitronix kits I will do that here. = 10in1 = * Maxitronix/10in1/7")
- 07:44, 12 March 2024 Crustaceans Chirp Chirp Challenge (hist | edit) [24,476 bytes] Sixsigma (talk | contribs) (Created page with " [08:28] <kline> i dont know what the standard target for "is this embedded system useful" is but id like to propose a midi synth: [08:28] <kline> * implement serial comms [08:28] <kline> * needs timers/interrupts [08:28] <kline> * includes PWM/etc peripherals for IO [08:29] <kline> * actually fails if you fuck up the hard realtime aspects [08:29] <kline> * you get a cool toy at the end [08:29] <kline> bonus: you can scale to things like polyphony")
- 15:41, 29 February 2024 Trail (hist | edit) [12,415 bytes] Sixsigma (talk | contribs) (Created page with "My workstation 'trail' is one of my computers in my lab. You can read about its [https://www.jj5.net/disk/trail.php disk configuration]. This is my recording workstation for the booth in my studio. The hardware for this workstation used to be my auxiliary workstation 'tradition'. = Network = {|class="wikitable" ! NIC !! Interface !! IP Address !! Cable |- | Onboard || enp0s31f6 || 10.1.27.52 || Red |} = Parts = {|class="wikitable sortab...")
- 14:32, 25 February 2024 Kebab (hist | edit) [58 bytes] Sixsigma (talk | contribs) (Created page with "* Beef * Lettuce * Tomato * Onion * Tabouli * Tomato Sauce")
- 16:50, 30 January 2024 Visual Studio Code (hist | edit) [710 bytes] Sixsigma (talk | contribs) (Created page with "= Notes = Press Ctrl + Shift + P to bring up the Command Palette.")
- 18:41, 29 January 2024 KT-908 (hist | edit) [704 bytes] Sixsigma (talk | contribs) (Created page with "In my lab (and elsewhere) I have a few KT-908 digital thermometers. To set the time etc on these things you hold down the MODE button until the input starts flashing. Then ADJ to adjust the setting, and MODE again when done.")