Maxitronix/10in1/7
This is project 7/10 for my Maxitronix 10in1.
I asked about how to probe this circuit over here: https://www.eevblog.com/forum/beginners/how-to-measure-am-broadcast-circuit-with-oscilloscope/
I learned a few things:
- All four probes on my scope have their ground leads connected to each other (there is only one ground)
- To avoid potential problems for beginners it is best to only connect one ground lead (the others can be left unattached)
- I should use my probes in 10x mode, not 1x mode
- In 1x mode the resistance is 1MΩ and the capacitance is 100pF
- In 10x mode the resistance is 10MΩ and the capacitance is 10pF