Tact

From John's wiki
Jump to navigation Jump to search

My next workstation will be called 'wit'. My current workstation is 'tact'. My next laptop will be called 'hawk'. My current laptop is called 'condor'.

This is where I planned the hardware to purchase for my new workstation 'tact'. I have my new computer now! I'm running Debian Stretch on it. It's super cool. I've been keeping the below up-to-date as I make a few adjustments. E.g. since the initial purchase I added an M.2 drive (and new monitors!)

Wish list

Some potential upgrades or features of my next workstation.

64 GB RAM

One of these:

Memory Date Price Status
G.Skill Trident Z RGB 64GB 2020-04-06 $869 In Stock
G.Skill Ripjaws V 64GB 2020-04-06 $699 Preorder

Dual UHD monitors

Ethernet switch

NAS

Upgrades

UHD monitor

Specs

CPU

Motherboard

RAM

Disk

Video card

Replaced:

Monitors

Considered:

Also of interest was the Dell UltraSharp 3008WFP which can do 2560x1600... might put one or two of those on my wishlist.

Case

PSU

Optical drive

Mouse

Chair

Cables

NIC

Keyboard

PC Part Picker

Research

CPU

Thermal paste

RAID

Chipset


Sound issue

jj5@tact:~$ cat /proc/asound/cards
0 [PCH            ]: HDA-Intel - HDA Intel PCH
                     HDA Intel PCH at 0xdf240000 irq 134
jj5@tact:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: Generic Analog [Generic Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: Generic Digital [Generic Digital]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
jj5@tact:~$ pacmd list-sinks
1 sink(s) available.                                                                                                    
 * index: 0                                                                                                            
       name: <alsa_output.pci-0000_00_1f.3.iec958-stereo>                                                              
       driver: <module-alsa-card.c>                                                                                    
       flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY                                 
       state: RUNNING                                                                                                  
       suspend cause:                                                                                                  
       priority: 9958                                                                                                  
       volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB                               
               balance 0.00                                                                                            
       base volume: 65536 / 100% / 0.00 dB                                                                             
       volume steps: 65537                                                                                             
       muted: no                                                                                                       
       current latency: 39.98 ms                                                                                       
       max request: 6 KiB                                                                                              
       max rewind: 344 KiB                                                                                             
       monitor source: 0                                                                                               
       sample spec: s16le 2ch 44100Hz                                                                                  
       channel map: front-left,front-right                                                                             
                    Stereo                                                                                             
       used by: 1                                                                                                      
       linked by: 1
       configured latency: 40.00 ms; range is 0.50 .. 2000.00 ms
       card: 0 <alsa_card.pci-0000_00_1f.3>
       module: 6
       properties:
               alsa.resolution_bits = "16"
               device.api = "alsa"
               device.class = "sound"
               alsa.class = "generic"
               alsa.subclass = "generic-mix"
               alsa.name = "Generic Digital"
               alsa.id = "Generic Digital"
               alsa.subdevice = "0"
               alsa.subdevice_name = "subdevice #0"
               alsa.device = "1"
               alsa.card = "0"
               alsa.card_name = "HDA Intel PCH"
               alsa.long_card_name = "HDA Intel PCH at 0xdf240000 irq 134"
               alsa.driver_name = "snd_hda_intel"
               device.bus_path = "pci-0000:00:1f.3"
               sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
               device.bus = "pci"
               device.vendor.id = "8086"
               device.vendor.name = "Intel Corporation"
               device.product.id = "a2f0"
               device.form_factor = "internal"
               device.string = "iec958:0"
               device.buffering.buffer_size = "352800"
               device.buffering.fragment_size = "176400"
               device.access_mode = "mmap+timer"
               device.profile.name = "iec958-stereo"
               device.profile.description = "Digital Stereo (IEC958)"
               device.description = "Built-in Audio Digital Stereo (IEC958)"
               alsa.mixer_name = "Realtek Generic"
               alsa.components = "HDA:10ec1168,10438723,00100003 HDA:8086280b,80860101,00100000"
               module-udev-detect.discovered = "1"
               device.icon_name = "audio-card-pci"
       ports:
               iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
                       properties:
       active port: <iec958-stereo-output>