MESR-100 ESR Meter
Jump to navigation
Jump to search
In my lab I have an MESR-100 ESR meter.
Affiliate links
If you want to buy, see here:
| Vendor | Product |
|---|---|
| AliExpress | MESR-100 ESR Multimeter Capacitance Ohm Meter Professional Measuring Internal Resistance of Capacitor Capacitance Circuit Tester |
Documentation
I keep my documentation for this equipment here:
- /home/jj5/electronics/equipment/meter-MESR-100-ESR-Meter/
Purchase
Purchased from here: MESR-100 ESR Multimeter Capacitance Ohm Meter Professional Measuring Internal Resistance of Capacitor Capacitance Circuit Tester.
Details
Description
Auto-ranging capacitor ESR and low Ohm meter measuring range from 0.001 to 100.0R, support in circuit testing. Using true 100 KHz sine wave to measure the ESR value, which is equal to the testing method of capacitor manufacturer.
Features:
- It is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C).
- The impedance become small, and we can then measure the true series resistor value.
- Using this theory, we can measure the capacitor is bad/ damaged or good in condition.
- Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test.
- During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.
- Dual terminal, for fast and easy inspect internal resistance of the capacitor, a printed ESR table for fast check.
- Equipped with a SMD alligator clip for more accurately testing. Copper plating on the surface, which is anti-corrosion and oxidation resistance.
Note: The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.
Specifications
| Range | Accuracy (After zero, tested with 1,10,100R resistor) | Refresh Time (Manual Mode) Auto mode take 0 to 2s, more time depends on capacitance value. |
|---|---|---|
| 0.000 to 1.000R | 1%+2Digit | ～0.4s |
| 1.000 to 10.00R | 1%+1Digit | ～0.4s |
| 10.00 to 100.0R | 2%+1Digit | ～0.4s |
- Color: Black
- Accuracy: Up to 1% (detail on above table)
- Wide Measurement Range: >1uF
- High Resolution: 4 digit, or 0.001Ohm @ 1 Ω range
- Measuring voltage: <～40mV RMS (TESTING VOLTAGE)
- External Power: 5V micro USB
- Operating Current: 0.02A
- Battery: 2 * AA 1.5V Battery (not included)
- Battery Life time: >80 Hours
- Item Size: Approx 14.5 * 8 * 3cm / 5.7 * 3.1 * 1.2in
- Item Weight: Approx 139.6g / 4.9oz
- Package Size: Approx 17 * 9 * 5cm / 6.7 * 3.5 * 2.0in
- Package Weight: Approx 218g / 7.7oz
Package List
- 1x Capacitance Meter
- 2x Test Clips
- 1x SMD Clip
- 1x User Manual