Horusdy Soldering Station
In my lab I have a Horusdy Soldering Station a 2-in-1 Soldering Iron and Hot Air Gun.
Affiliate links
If you want to buy, see here:
| Vendor | Product |
|---|---|
| Amazon Australia | Horusdy 2in1 Soldering Station Solder Iron Rework Hot Air Blower Digital SMD Display + 11 Tips, 4 Nozzles & Tweezer Set |
Documentation
I keep my documentation for this equipment here:
- /home/jj5/electronics/equipment/soldering-station-Horusdy/
Purchase
I purchased this one from Amazon: Horusdy 2in1 Soldering Station Solder Iron Rework Hot Air Blower Digital SMD Display + 11 Tips, 4 Nozzles & Tweezer Set.
Notes
There are some customer reviews here: Customer reviews: Horusdy 2in1 Soldering Station Solder Iron Rework Hot Air Blower Digital SMD Display + 11 Tips, 4 Nozzles & Tweezer Set.
The specs below were taken from here: Horusdy 2in1 Soldering Station Solder Iron Rework Hot Air Blower Digital SMD Display + 11 Tips, 4 Nozzles and Tweezer Set and here: 2in1 Soldering Solder Station Rework Iron Hot Air Gun Digital SMD Desoldering.
I made some notes about soldering temperature.
The tips seem to be compatible with the tips for the Hakko soldering station.
Temperature
Some notes from over here:
High temperature work can damage the tip. Lead solder typical melting point is 183 °C, lead-free solder typical melting point is 227 °C, usually the welding temperature is 300-380 °C. 380 °C is the temperature of the dividing line, higher than 380 °C can seriously affect the life of the tip. Stay within 300-380 °C.
Description
Horusdy 2in1 Soldering Station Solder Iron Rework Hot Air Blower Digital SMD Display + 11 Tips, 4 Nozzles and Tweezer Set
- This machine is equipped with a heat gun and a soldering iron. With handle induction system, automatic cooling, automatic constant temperature. Dual control switches, the most scientific and fashionable two-in-one design, with high-quality ABS plastic shell, the machine is compact and durable.
- It has big screen dual blue LED display sets, accurate setting and control temperature at +1°C, temperature adjustment range from 100°C to 480°C (212°F - 896°F), temperature tolerance is within +2°C.
- Anti-static design of the whole machine, effectively eliminate the damage of SMD components. it has also the function of fault self-detection and fault warning. Competent for various tasks - comes with 11 tips & 4 stainless steel nozzles & 7 Precision Tweezers.
- For your own safety, please read the manual carefully before using and strictly comply with the rules of "Precautions".
- We offer one year warranty, please feel free to contact our support team if you have any issue.
Feature
- Hot air and hot iron 2in1 rework soldering station
- Dual LCD digital displays to show precision temperature
- Extremely low noise and space saving design
- Handle with sensor switch features access operating mode when picks up or standby mode when lays down for more than 10 mins. Intelligence self-detection function features safe personal operation
- Automatic cooling function for effectively prolonging the heater's life and protecting the hot air gun
- ESD design of soldering iron to protect sensitive components International standard heater for convenient use and exchange
- Plastic holder for placing the hot air gun
- Metal stand for keeping the iron from flammable materials
- Competent for various tasks - comes with 11 tips & 4 stainless steel nozzles & 7 Precision Tweezers.
Please Note: When it displays "S-E" on the screen, it means the heater core might be damaged and needs to be replaced. Please feel free to ask for new replacement parts.
70W Soldering Iron
- Output Power: 70W
- Soldering Iron Temperature range: 200-480℃
- Temperature Stability: +/-1℃
- Tip of ground voltage: <2mv
- Tip of ground impedance: <2ohm
- Display Type: LED display
- Handle length: ≧100cm
750W Hot Air Blower
- Output Power: 750W
- Gun temperature range: 100-480℃
- Temperature Stability: +/-2℃
- Gun type: Air flow 120L/MIN
- Tip of ground voltage: <2mv
- Display Type: Digital display
- Handle length: ≧90cm
Note:
- Before the hot air gun is used, it should be placed on the bracket for 5 seconds.
- After the work is finished, the hot air gun must be placed on the bracket, and the hot air gun will cut off the heating power supply and enter into cooling mode, when the temperature is below 100Celsius, the gun will enter into sleeping mode.
- Pick it up when you need to use the hot air handle.
- If do not use for a long time, must turn off the switch.