This disk includes the SCSI Monitor Program described in the book, its
source code and some small utilities with source.

Additionally there is a Program called SCSIPLUS which is not documented
in the book. SCSIPLUS is a ongoing project which will propably lead to a
commercial program. However, the version supplied here is FREEWARE and may
be distributed freely.

You can reach the author using e-mail 100637.406@compuserve.com

Release Notes for SCSI Monitor

V 1.0 rev024e 18.07.94 (fs)

Implementation

An ASPI driver (ASPI for DOS or WINASPI) should be loaded.

Only ASPI hostadapter nr. 0 is supported.

If no ASPI driver is found, a target emulator gets loaded. It supports
the SCSI commands TEST UNIT READY, INQUIRY and REQUEST SENSE.

The non-documented command 'M' toggles between standard mode
and maintenance mode. In the maintenance mode, on a 'G' command,
the lower part of the data buffer on the screen gets overwritten
by a dump of the ASPI SRB.

Tested Hard/Software:

The SCSI Monitor has been tested by the author in numerous environments:

Operating Systems:      DOS 3.x, .. 7.0
                        Windows 3.x (DOS Window)
                        Windows 95 (DOS Window)

Host Adapters:          Adaptec 1540, 2940
                        AdvanSys 5140, 5142, 930, 940, 970
                        Shining Technologies Parallel Port Adapter
                        Future Domain TMC950 Chip